Props & Shoring

Maini adjustable steel props are ergonomically made to hold up a spectrum of temporary beams and floors. Maini Props are produced from an outer tube 60.3mm Dia and an inner tube of 4.83mm Dia. The threaded portion is friction welded to the outer tube to produce a lighter weight Prop. The weaved portion is friction free to which the outer tube is welded to manufacture a light weight prop.

Adjustable Steel Props are produced in following sizes No.0 to No. 4

The Adjustable telescopic span is an excellent mode of supporting platform made of concrete slabs. Its robust construction supports higher payload, which allows use of fewer shores. The system saves the time and reduces the labor costs.

Metriform & Dropheads gives the choice of 12 back up grids on Cuplok or props hold up scaffolding.

The lightweight steel beam incorporates a 100mm wide top flange which diminishes the requirement for a plywood infill, to cut down on maintenance costs. The heavy duty pressings are fixed to the beam ends providing maximum security at the site. The beams include a tongue position for the drophead. The Panel bearing lugs have a tapered wedge process for rapid affirmative position of panels, securing minimum grout loss and tight joints. If the beams are in the crosswise lay they cannot be removed/damaged. 

The Cantilever beams are designed to hold up regular access stop-end forms and loads; a safety instrument is introduced for securing the beam with the drophead so that they cannot be dismantled while hitting. A purvey is made for a guard-rail post which is joined using regular scaffold fittings and tube, this diminishes the requirement for an outside scaffold which leads to lot of saving during construction. 

The Wall form system offered by us includes Wall form panels fabricated using 12/10 gauge sheet, accessories, Flat frame /M.S angle, Channel/heavy duty soldiers and channel /tubular walers. Standard Panels of 1.25 m and soldiers in 2.5m height are available. Flexible panel are used for the curved walls, and heavy duty soldiers replaces channel soldiers for bulkier structures.

External corner angle, Double adjuster panel, lap angle and splay panel internal corner panel etc. Other Wallform accessories like assembly nut, , double /bridge clamp, single clamp and bold and wedge & clip are used for numerous conventional wall form shuttering applications.