Scaffolding Planks

We manufacture lightweight Galvanized steel scaffolding battens and planks. They have non-slip working surface, which can be used efficiently with omega transoms.

Size:
2.5M X 0.238M X 0.057M
1.3M X 0.238M X 0.057M

The Cuplock Scaffolding bridging horizontals provide complete working platform with necessary guardrails for safe vehicle passage.

Size:
Cuplock Bridging Horizontals 5.0M
Cuplock Bridging Horizontals 7.5M

The Cuplock inside board transom can be used with Hop-up brackets to cover the distance between standards if it exceeds the span of scaffold boards. The range of Quiklok intermediate transoms are available for 2 boards and 3 boards.

Size:
Cuplock Inside Board Transom 0.565 mm. (2 Board)
Cuplock Inside Board Transom 0.795 mm (3 Board)

The Cuplock Bracing is used for diagonal bracing of scaffolding. A diverse range of longitudinal braces made out of 20 mm N. B. 'L' tubes with swivel forged blades at each ends to be fitted into cups of Quiklok standards are available.

Size:
Cuplock Bracing 2.50M X 2.00M
Cuplock Bracing 2.50M X 1.50M
Cuplock Bracing 1.80M X 2.00M
Cuplock Bracing 1.80M X.1.50M

The Cuplock Cantilever Frame is used for providing support to the platform or Formwork at edges. This frame has ledger blades to be fitted into cups of Quiklok standards at one end and with provision for positioning jacks in three positions at the other end at 1.2 m, 1.25 m and 1.3 m from centerline of the standard.

Size:
Cuplock Cantilever Frame 1.0 M
Cuplock Cantilever Frame 1.5 M

Universal Jack
The Universal Screw Jack is an efficient method of jacking which is used either at the top or bottom of a scaffold structure. It is used in combination with Fork heads, Socket Base and Drop head Adaptors. 

Socket Base
The Socket Base is used in combination with the Universal jack and is drilled to permit the insertion of a securing bolt if required. The dimensions are as mentioned.

Spigot
Made out of 300 mm long square tube and without bolt spigots are used for aligning verticals

Adaptor
The Drop head Adaptor units allow easy conversion of dropheads from the Waffle and Trough or Metriform Support Systems to use with Quiklok.