Scaffolding Planks

Galvanized steel scaffolding planks and battens are lightweight non-slip working surface, which can be used with omega transoms

Size:
2.5M X 0.238M X 0.057M
1.3M X 0.238M X 0.057M

Scaffolding bridging item are used to provide working platform complete with necessary guardrails for vehicle passage.

Size:
Cuplock Bridging Horizontals 5.0M
Cuplock Bridging Horizontals 7.5M

For use with Hop-up brackets where distance between standards exceeds the span of scaffold boards Quiklok intermediate transoms are available for 2 boards and 3 boards.

Size:
Cuplock Inside Board Transom 0.565 mm. (2 Board)
Cuplock Inside Board Transom 0.795 mm (3 Board)

For diagonal bracing of scaffolding a range of longitudinal braces made out of 20 mm N. B. 'L' tubes with swivel forged blades at either ends to be fitted into cups of Quiklok standards are available.

Size:
Cuplock Bracing 2.50M X 2.00M
Cuplock Bracing 2.50M X 1.50M
Cuplock Bracing 1.80M X 2.00M
Cuplock Bracing 1.80M X.1.50M

This item is used for providing support to decking or formwork at edges. This frame has ledger blades to be fitted into cups of Quiklok standards at one end and with provision for accepting jacks in three positions at the other end at 1.2 m, 1.25 m and 1.3 m from centerline of the standard.

Size:
Cuplock Cantilever Frame 1.0 M
Cuplock Cantilever Frame 1.5 M

Universal Jack
The Screw Jack provides a method of jacking which can be used at either the top or bottom of a scaffold structure. It is used in conjunction with Forkheads, Socket Base and Drophead Adaptors.

Socket Base
The Socket Base is used in conjunction with the Universal jack and is drilled to allow for the insertion of a securing bolt if required. The dimensions are as mentioned.

Spigot
Made out of 300 mm long square tube and with out and bolt spigots are used for connecting verticals
Adaptor
The Drophead Adaptor units provide for the easy conversion of Dropheads from the Waffle and Trough or Metriform Support Systems for use with Quiklok.